Prepare pipes before you coat them using your Mini or Maxi Miller by attaching the tool you need from a variety of options including Picote Grinding Chains.
BEFORE
Whether you are using the Mini or the Maxi Miller, there is a range of tool options for the pipe you need to clean, including grinding chains for cast iron, clay, concrete and PVC.
AFTER
Flush out the pipe with water while you clean or use a vacuum to remove remaining debris. Make sure that the pipe is as dry as possible before beginning the coating process.
CLEANING TOOLS
Use your Mini or Maxi Miller to thoroughly clean pipes before coating them with these tools
CYCLONE
PREMIUM CHAIN
​
​
CYCLONE
STANDARD CHAIN
​
​
CYCLONE
PVC CHAIN
​
​
ORIGINAL
PREMIUM CHAIN
​
​
ORIGINAL
STANDARD CHAIN
​
​
ORIGINAL
PVC CHAIN
​
​
WIRE
CLEANING BRUSH
​
​
THE SMART
​
CUTTER
SMART
SPIDER
​
​
THE SMART
​
CUTTER 6-PANEL
TWISTER
CLEANER
​
​
Guides
Not sure which tool to use for the job? Check out our quick guides for cast iron, clay and plastic pipes to find the most suitable tool to use with your Mini or Maxi Miller to prepare even the toughest of pipes before you begin the Picote Brush Coating™ System
